Skip to main content

24" Wide Built-In Kegerator, ADA Compliant

SKU: SBC58BBINKCSSADA
32 inch height allows installation under lower counters following ADA guidelines
DISCONTINUED- REPLACED BY SBC58BLBICSSADANK
This unit meets NSF sanitation standards for commercial use. For information on its commercial sanitation listing, see Specifications.
32.25" H x 23.63" W x 22.75" D
(82cm H x 60cm W x 58cm D)

Overview
Height of Cabinet 32.0" (81 cm)
Height to Hinge Cap 32.25" (82 cm)
Width 23.63" (60 cm)
Depth 22.75" (58 cm)
Depth with Handle 24.75" (63 cm)
Depth with door at 90° 45.0" (114 cm)
Capacity 5.5 cu.ft. (156 L)
Defrost Type Automatic
Door Stainless Steel
Cabinet Stainless Steel
US Electrical Safety ETL
Canadian Electrical Safety ETL-C
Sanitation ETL-S
Amps 1.3
Voltage/Frequency 115 V AC/60 Hz
Weight 110.0 lbs. (50 kg)
Shipping Weight 120.0 lbs. (54 kg)
Parts & Labor Warranty 1 Year
Compressor Warranty 5 Years
UPC 761101062907
Kegerator
Door Swing RHD
Reversible Factory Reversible
Thermostat Type Dial
Interior Light Yes
Fan Type Exterior
Refrigerant R134a
Refrigerant Amount 1.8 oz.
High Side PSI 285.0
Low Side PSI 88.0
Inter Height 25.75" (65 cm)
Interior Width 21.0" (53 cm)
Interior Depth 17.75" (45 cm)
Compressor Step Height 6.5" (17 cm)
Compressor Step Width 21.0" (53 cm)
Compressor Step Depth 5.5" (14 cm)
Temperature Range 34º to 43ºF

Exterior
LHD - Left hand door swing
Door reversal to left hand swing
DT - Digital thermostat
Install a digital thermostat with external readout for precise temperature management
SSK - Stainless steel kickplate
Stainless steel kickplate factory installed
Lock
L-SideLock
Add a single keyed lock located on the door's side
Handle
TBC Copper Towel Bar Handle Upgrade
Change this handle to a 12" vertically mounted towel bar style handle made from pure copper for antimicrobial protection

ADA compliant height

Sized at 32 inches high (32.25 to hinge cap) for installation under lower ADA compliant counters

Commercially approved

ETL-S listed to NSF-7 commercial standards and meets UL-471 for use in foodservice settings

Built-in capable

Front-breathing design allows fully recessed installation under counters

Designed for 1/6 kegs

Interior can store up to two sixtel kegs

Tap kit not included

Install your own tapping equipment to create a customized beer cooler

Stainless steel finish

Door and cabinet are wrapped in 304 grade stainless steel for a professional look with lasting durability

Professional handle

Curved towel bar style handle in brushed stainless steel

Adjustable thermostat

Interior dial thermostat ensures easy temperature management

Automatic defrost

No-frost operation for minimum user maintenance

Stainless steel drip tray

Removable two-piece drip tray included for added convenience

Stainless steel guard rail

Durable railing makes it easier to neaten service

Interior light

Turn the light on when you need it and off when you're done with a convenient rocker switch

Interior CO2 holder

Bracket is installed inside, allowing you to save on depth by keeping the tank behind your kegs

Stainless steel floor cover

Interior includes steel cover to protect the floor when loading kegs

One piece interior liner

Easy clean-up with a seamless liner that won't hold a mess in hidden crevices

Hidden evaporator

Cold wall design with hidden evaporator and seamless interior

Fully finished cabinet

Allows the unit to be used freestanding

100% CFC free

Environmentally friendly design without ozone-damaging chemicals

Summit Commercial brings unique appliance choices to ADA compliant settings with a new line of commercial beer dispensers made in Europe.

Sized at 32 inches high, the SBC58BBINKCSSADA is designed to fit under lower ADA compliant counters. The front-breathing design allows built-in installation, while the fully finished cabinet also enables freestanding use. This unit comes with a stainless steel wrapped cabinet and door, complete with a pro style towel bar handle. We include a guard rail and two-piece stainless steel drip tray for cleaner service. The SBC58BBINKCSSADA does not include any tapping equipment, allowing "do-it-yourselfers" to customize their draft system.

Inside, the SBC58BBINKCSSADA is designed to hold two 1/6 (sixtel) kegs or one tall quarter keg (note: interior does not accommodate a standard half barrel). Automatic defrost ensures easy user maintenance, with a seamless interior for easier cleaning. The stainless steel floor offers added durability when loading kegs. This unit includes an interior light with an on/off rocker switch and a dial thermostat for easy and intuitive temperature management. A CO2 tank bracket is located inside, allowing you to keep the tank inside and save on exterior depth.

The SBC58BBINKCSSADA is ETL-S listed to NSF-7 commercial standards. Additional ADA compliant kegerator choices are available with panel-ready or glass doors. Browse our complete line for more choices. 



Due to our commitment to continuous product improvement, all specifications are subject to change without notice.

California residents:

Warning WARNING: This product can expose you to chemicals including nickel (metallic), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Note: Nickel is a component of stainless steel.

YOU MIGHT NEED

KitWINETWIN Accessory
FOR COMMERCIAL OR HOME USE

KitWineTWIN

12.0" H x 3.0" W x 3.0" D
Dual tap tapping equipment with CO2/nitrogen tank to serve wine from most kegerators
KitCMTWIN Accessory
FOR COMMERCIAL OR HOME USE

KitCMTWIN

12.0" H x 3.0" W x 3.0" D
Dual tap system with nitrogen tank to serve both nitro coffee and flat iced coffee from most beer dispensers
KitNCF Accessory
FOR COMMERCIAL OR HOME USE

KitNCF

12.0" H x 3.0" W x 3.0" D
Tapping equipment with nitrogen tank to serve nitro coffee from most beer dispensers
KITSBC7KOMTWIN Accessory
FOR COMMERCIAL OR HOME USE

KITSBC7KOMTWIN

12.0" H x 3.0" W x 3.0" D
Commercial dual tap tapping equipment with CO2 tank to serve kombucha from most beer dispensers
KitNCFTWIN Accessory
FOR COMMERCIAL OR HOME USE

KitNCFTWIN

12.0" H x 3.0" W x 3.0" D
Dual tap system with nitrogen tank to serve nitro coffee from most beer dispensers

SIMILAR PRODUCTS

SBC56GBINKCSSADA Kegerator Front
MEETS NSF-7

SBC56GBINKCSSADA

32.25" H x 23.63" W x 23.0" D
Built-in undercounter ADA height commercially listed beer dispenser with glass door, lock, and stainless steel wrappe...
AL57G Refrigerator Front
MEETS NSF-7

AL57G

32.0" H x 23.63" W x 22.63" D
24" wide built-in ADA compliant commercial beverage center with glass door, digital controls, front lock, LED lightin...
SBC635MBIIF Kegerator Front

SBC635MBIIF

33.5" H x 24.0" W x 25.88" D
Built-in residential beer dispenser, auto defrost with digital thermostat, panel-ready door, and black cabinet
BIM68OSPUMP Icemaker Front
FOR COMMERCIAL OR HOME USE

BIM68OSPUMP

33.63" H x 14.88" W x 22.63" D
15" wide 62 lb. built-in undercounter commercially listed indoor/outdoor clear icemaker with internal pump and comple...
SBC635MOS7HVTWIN Kegerator Front
MEETS NSF-7

SBC635MOS7HVTWIN

33.5" H x 24.0" W x 25.88" D
Freestanding commercially listed dual tap outdoor beer dispenser, auto defrost with digital thermostat, stainless ste...