Skip to main content
COVID-19 VACCINE COLD STORAGE SOLUTIONS

24" Wide Built-In Kegerator, ADA Compliant

SKU: SBC58BLBICSSADANK
32 inch height allows installation under lower counters following ADA guidelines
Estimated Time to Ship:

5 to 7 days

This unit meets NSF sanitation standards for commercial use. For information on its commercial sanitation listing, see Specifications.
32.25" H x 23.63" W x 22.75" D
(82cm H x 60cm W x 58cm D)

Overview
Height of Cabinet 32.0" (81 cm)
Height to Hinge Cap 32.25" (82 cm)
Width 23.63" (60 cm)
Depth 22.75" (58 cm)
Depth with Handle 24.75" (63 cm)
Depth with door at 90° 45.0" (114 cm)
Capacity 5.5 cu.ft. (156 L)
Defrost Type Automatic
Door Stainless Steel
Cabinet Stainless Steel
US Electrical Safety ETL
Canadian Electrical Safety ETL-C
Sanitation ETL-S
Amps 1.2
Voltage/Frequency 115 V AC/60 Hz
Weight 110.0 lbs. (50 kg)
Shipping Weight 120.0 lbs. (54 kg)
Parts & Labor Warranty 1 Year
Compressor Warranty 5 Years
UPC 761101069722
Kegerator
Door Swing RHD
Reversible Factory Reversible
Thermostat Type Dial
Interior Light Yes
Fan Type Exterior
Refrigerant R600a
Refrigerant Amount 0.64 oz.
High Side PSI 180.0
Low Side PSI 80.0
Inter Height 25.75" (65 cm)
Interior Width 21.0" (53 cm)
Interior Depth 17.75" (45 cm)
Compressor Step Height 6.5" (17 cm)
Compressor Step Width 21.0" (53 cm)
Compressor Step Depth 5.5" (14 cm)
Temperature Range 34º to 43ºF

Exterior
LHD - Left hand door swing
Door reversal to left hand swing
DT - Digital thermostat
Install a digital thermostat with external readout for precise temperature management
SSK - Stainless steel kickplate
Stainless steel kickplate factory installed
Lock
L-Installed Lock
Add a single key lock to the door with the L option

ADA compliant height

Sized at 32 inches high (32.25 to hinge cap) for installation under lower ADA compliant counters

Commercially approved

ETL-S listed to NSF-7 commercial standards and meets UL-471 for use in foodservice settings

Built-in capable

Front-breathing design allows fully recessed installation under counters

Designed for 1/6 kegs

Interior can store up to two sixtel kegs

Tap kit not included

Install your own tapping equipment to create a customized beer cooler

Stainless steel finish

Door and cabinet are wrapped in 304 grade stainless steel for a professional look with lasting durability

Professional handle

Curved towel bar style handle in brushed stainless steel

Adjustable thermostat

Interior dial thermostat ensures easy temperature management

Automatic defrost

No-frost operation for minimum user maintenance

Stainless steel drip tray

Removable two-piece drip tray included for added convenience

Stainless steel guard rail

Durable railing makes it easier to neaten service

Interior light

Turn the light on when you need it and off when you're done with a convenient rocker switch

Interior CO2 holder

Bracket is installed inside, allowing you to save on depth by keeping the tank behind your kegs

Stainless steel floor cover

Interior includes steel cover to protect the floor when loading kegs

One piece interior liner

Easy clean-up with a seamless liner that won't hold a mess in hidden crevices

Hidden evaporator

Cold wall design with hidden evaporator and seamless interior

Fully finished cabinet

Allows the unit to be used freestanding

100% CFC free

Environmentally friendly design without ozone-damaging chemicals

CARB Compliant

Environmentally friendly hydrocarbon-based refrigerant for a greener footprint that meets current CARB regulations

Summit Commercial brings unique appliance choices to ADA compliant settings with a new line of commercial beer dispensers made in Europe.

Sized at 32 inches high, the SBC58BLBICSSADANK is designed to fit under lower ADA compliant counters. The front-breathing design allows built-in installation, while the fully finished cabinet also enables freestanding use. This unit comes with a stainless steel wrapped cabinet and door, complete with a pro style towel bar handle. We include a guard rail and two-piece stainless steel drip tray for cleaner service. The SBC58BBINKCSSADA does not include any tapping equipment, allowing "do-it-yourselfers" to customize their draft system.

Inside, the SBC58BLBICSSADANK is designed to hold two 1/6 (sixtel) kegs (note: interior does not accommodate a standard half barrel). Automatic defrost ensures easy user maintenance, with a seamless interior for easier cleaning. The stainless steel floor offers added durability when loading kegs. This unit includes an interior light with an on/off rocker switch and a dial thermostat for easy and intuitive temperature management. A CO2 tank bracket is located inside, allowing you to keep the tank inside and save on exterior depth.

The SBC58BLBICSSADANK is ETL-S listed to NSF-7 commercial standards. Additional ADA compliant kegerator choices are available with panel-ready or glass doors. Browse our complete line for more choices. 



Due to our commitment to continuous product improvement, all specifications are subject to change without notice.

California residents:

Warning WARNING: This product can expose you to chemicals including nickel (metallic), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Note: Nickel is a component of stainless steel.

YOU MIGHT NEED

SpeedRail Accessory Front

SpeedRail

8.0" H x 18.0" W x 5.33" D
18" wide stainless steel single-tier speed rail with hook-style back and velcro strips for easy installation
KitWINETWIN Accessory
FOR COMMERCIAL OR HOME USE

KitWineTWIN

12.0" H x 3.0" W x 3.0" D
Dual tap tapping equipment with CO2/nitrogen tank to serve wine from most kegerators
KitCMTWIN Accessory
FOR COMMERCIAL OR HOME USE

KitCMTWIN

12.0" H x 3.0" W x 3.0" D
Dual tap system with nitrogen tank to serve both nitro-infused coffee and flat iced coffee from most beer dispensers
KitNCF Accessory
FOR COMMERCIAL OR HOME USE

KitNCF

12.0" H x 3.0" W x 3.0" D
Tapping equipment with nitrogen tank to serve nitro-infused coffee from most beer dispensers
KITSBC7KOMTWIN Accessory
FOR COMMERCIAL OR HOME USE

KITSBC7KOMTWIN

12.0" H x 3.0" W x 3.0" D
Commercial dual tap tapping equipment with CO2 tank to serve kombucha from most beer dispensers

SIMILAR PRODUCTS

ALFZ37BFROST Freezer Front

ALFZ37BFROST

32.0" H x 19.88" W x 22.5" D
COLD CAVERN beer froster, Summit's built-in undercounter ADA compliant freezer that stores aluminum bottled beer at 2...
SBC58BLBIADANKIF Kegerator Front
MEETS NSF-7

SBC58BLBIADANKIF

32.25" H x 23.63" W x 22.75" D
Built-in undercounter ADA height commercially listed beer dispenser with panel-ready door and black cabinet; no tappi...
SBC58BLBICSSADA Kegerator Front
MEETS NSF-7

SBC58BLBICSSADA

32.25" H x 23.63" W x 22.75" D
Built-in undercounter ADA height commercially listed dual tap beer dispenser in stainless steel
SBC56GBINKCSSADA Kegerator Front
MEETS NSF-7

SBC56GBINKCSSADA

32.25" H x 23.63" W x 23.0" D
Built-in undercounter ADA height commercially listed beer dispenser with glass door, lock, and stainless steel wrappe...
ALWC532 Wine Cellar Front
FOR COMMERCIAL OR HOME USE

ALWC532

31.63" H x 23.5" W x 23.38" D
ADA compliant commercially approved dual zone built-in wine cellar designed for the display and refrigeration of up t...