Skip to main content

24" Wide Built-In Kegerator, ADA Compliant

SKU: SBC58BBINKADA
32 inch height allows installation under lower counters following ADA guidelines
DISCONTINUED- REPLACED BY SBC58BLBIADANK
This unit meets NSF sanitation standards for commercial use. For information on its commercial sanitation listing, see Specifications.
32.25" H x 23.63" W x 23.5" D
(82cm H x 60cm W x 60cm D)

Overview
Height of Cabinet 32.0" (81 cm)
Height to Hinge Cap 32.25" (82 cm)
Width 23.63" (60 cm)
Depth 23.5" (60 cm)
Depth with Handle 24.25" (62 cm)
Depth with door at 90° 45.0" (114 cm)
Capacity 5.5 cu.ft. (156 L)
Defrost Type Automatic
Door Stainless Steel
Cabinet Black
US Electrical Safety ETL
Canadian Electrical Safety ETL-C
Sanitation ETL-S
Amps 1.3
Voltage/Frequency 115 V AC/60 Hz
Weight 110.0 lbs. (50 kg)
Shipping Weight 120.0 lbs. (54 kg)
Parts & Labor Warranty 1 Year
Compressor Warranty 5 Years
UPC 761101062891
Kegerator
Door Swing RHD
Reversible Yes
Thermostat Type Dial
Interior Light Yes
Fan Type Exterior
Refrigerant R134a
Refrigerant Amount 1.8 oz.
High Side PSI 285.0
Low Side PSI 88.0
Inter Height 25.75" (65 cm)
Interior Width 21.0" (53 cm)
Interior Depth 17.75" (45 cm)
Compressor Step Height 6.5" (17 cm)
Compressor Step Width 21.0" (53 cm)
Compressor Step Depth 5.5" (14 cm)
Temperature Range 34º to 43ºF

Lock
L-SideLock
Add a single keyed lock located on the door's side
Exterior
SSK - Stainless steel kickplate
Stainless steel kickplate factory installed
DT - Digital thermostat
Install a digital thermostat with external readout for precise temperature management
LHD - Left hand door swing
Door reversal to left hand swing

ADA compliant height

Sized at 32 inches high (32.25 to hinge cap) for installation under lower ADA compliant counters

Commercially approved

ETL-S listed to NSF-7 commercial standards and meets UL-471 for use in foodservice settings

Built-in capable

Front-breathing design allows fully recessed installation under counters

Designed for 1/6 kegs

Interior can store up to two sixtel kegs

Tap kit not included

Install your own tapping equipment to create a customized beer cooler

Stainless steel wrapped door

304 grade stainless steel for a professional look with lasting durability

Professional handle

Thin handle with common 14mm diameter in brushed stainless steel mounted horizontally

Adjustable thermostat

Interior dial thermostat ensures easy temperature management

Automatic defrost

No-frost operation for minimum user maintenance

Reversible door

User-reversible door swing allows you to easily adjust to better accommodate your setting

Stainless steel drip tray

Removable two-piece drip tray included for added convenience

Stainless steel guard rail

Durable railing makes it easier to neaten service

Interior light

Turn the light on when you need it and off when you're done with a convenient rocker switch

Interior CO2 holder

Bracket is installed inside, allowing you to save on depth by keeping the tank behind your kegs

Stainless steel floor cover

Interior includes steel cover to protect the floor when loading kegs

One piece interior liner

Easy clean-up with a seamless liner that won't hold a mess in hidden crevices

Hidden evaporator

Cold wall design with hidden evaporator and seamless interior

Fully finished cabinet

Allows the unit to be used freestanding

100% CFC free

Environmentally friendly design without ozone-damaging chemicals

Summit Commercial brings unique appliance choices to ADA compliant settings with a new line of commercial beer dispensers made in Europe.

Sized at 32 inches high, the SBC58BBINKADA is designed to fit under lower ADA compliant counters. The front-breathing design allows built-in installation, while the fully finished black cabinet also enables freestanding use. This unit features a user-reversible 304 grade stainless steel wrapped door complete with a stainless steel handle mounted horizontally for a modern look. We include a guard rail (ships uninstalled) and removable two-piece stainless steel drip tray for cleaner service. This unit does not include any tapping equipment, allowing "do-it-yourselfers" to customize their draft system.

Inside, the SBC58BBIADA is designed to hold two 1/6 (sixtel)  kegs or one tall quarter keg (note: interior does not accommodate a standard half barrel). Automatic defrost ensures easy user maintenance, with a seamless interior for easier cleaning. The stainless steel floor offers added durability when loading kegs. This unit includes an interior light with an on/off rocker switch and a dial thermostat for easy and intuitive temperature management. A CO2 tank bracket is located inside, allowing you to keep the tank inside and save on exterior depth.

The SBC58BBINKADA is ETL-S listed to NSF-7 commercial standards. Additional ADA compliant kegerator choices are available with panel-ready or glass doors. Browse our complete line for more choices. 



Due to our commitment to continuous product improvement, all specifications are subject to change without notice.

California residents:

Warning WARNING: This product can expose you to chemicals including nickel (metallic), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Note: Nickel is a component of stainless steel.

YOU MIGHT NEED

KITSBC7KOMTWIN Accessory
FOR COMMERCIAL OR HOME USE

KITSBC7KOMTWIN

12.0" H x 3.0" W x 3.0" D
Commercial dual tap tapping equipment with CO2 tank to serve kombucha from most beer dispensers
KitWINETWIN Accessory
FOR COMMERCIAL OR HOME USE

KitWineTWIN

12.0" H x 3.0" W x 3.0" D
Dual tap tapping equipment with CO2/nitrogen tank to serve wine from most kegerators
KitCMTWIN Accessory
FOR COMMERCIAL OR HOME USE

KitCMTWIN

12.0" H x 3.0" W x 3.0" D
Dual tap system with nitrogen tank to serve both nitro coffee and flat iced coffee from most beer dispensers
KitNCF Accessory
FOR COMMERCIAL OR HOME USE

KitNCF

12.0" H x 3.0" W x 3.0" D
Tapping equipment with nitrogen tank to serve nitro coffee from most beer dispensers
KitNCFTWIN Accessory
FOR COMMERCIAL OR HOME USE

KitNCFTWIN

12.0" H x 3.0" W x 3.0" D
Dual tap system with nitrogen tank to serve nitro coffee from most beer dispensers

SIMILAR PRODUCTS

SBC56GBINKADA Kegerator Front
MEETS NSF-7

SBC56GBINKADA

32.25" H x 23.38" W x 23.5" D
Built-in undercounter ADA height commercially listed beer dispenser with glass door, lock, and black cabinet; no tapp...
SWC6GBLBIADA Wine Cellar Front
FOR COMMERCIAL OR HOME USE

SWC6GBLBIADA

32.38" H x 23.63" W x 23.5" D
ADA compliant, commercially approved wine cellar for built-in undercounter use, with glass door, black cabinet and lock
AL57G Refrigerator Front
MEETS NSF-7

AL57G

32.0" H x 23.63" W x 22.63" D
24" wide built-in ADA compliant commercial beverage center with glass door, digital controls, front lock, LED lightin...
SBC635MBIIF Kegerator Front

SBC635MBIIF

33.5" H x 24.0" W x 25.88" D
Built-in residential beer dispenser, auto defrost with digital thermostat, panel-ready door, and black cabinet
BIM68OSPUMP Icemaker Front
FOR COMMERCIAL OR HOME USE

BIM68OSPUMP

33.63" H x 14.88" W x 22.63" D
15" wide 62 lb. built-in undercounter commercially listed indoor/outdoor clear icemaker with internal pump and comple...