SBC58BBINKIFADA

Commercial meets nsf 57f181a562ef64be646d83b66028b1c5c2f384b45328a17b7b74a5f0cdc84c8e
This unit meets NSF sanitation standards for commercial use. For information on its commercial sanitation listing, see Specifications.

32 inch height allows installation under lower counters following ADA guidelines

32.25" H x 23.63" W x 22.75" D

(82cm H x 60cm W x 58cm D)

OVERVIEW

  • 32 inch height fits under lower ADA compliant counters
  • Commercially listed to NSF-7 standards
  • Flexible design allows built-in or freestanding use in 24" spaces
  • Customizable door front accepts full overlay panels for a seamless look that can blend into cabinetry
  • Allows you to install your own custom tapping equipment
  • Made in Europe

SPECIFICATIONS

Overview
Height of Cabinet 32.0" (81 cm)
Height to Hinge Cap 32.25" (82 cm)
Width 23.63" (60 cm)
Depth 22.75" (58 cm)
Depth with door at 90° 45.0" (114 cm)
Capacity 5.5 cu.ft. (156 L)
Defrost Type Automatic
Door Panel-Ready
Cabinet Black
US Electrical Safety ETL
Canadian Electrical Safety ETL-C
Sanitation ETL-S
Amps 1.3
Voltage/Frequency 115 V AC/60 Hz
Weight 110.0 lbs. (50 kg)
Shipping Weight 120.0 lbs. (54 kg)
Parts & Labor Warranty 1 Year
Compressor Warranty 5 Years
Beer Dispenser
Door Swing RHD
Reversible Factory Reversible
Thermostat Type Dial
Interior Light Yes
Fan Type Exterior
Refrigerant R134a
Refrigerant Amount 1.8 oz.
High Side PSI 285.0
Low Side PSI 88.0
Inter Height 26.25" (67 cm)
Interior Width 21.0" (53 cm)
Interior Depth 17.75" (45 cm)
Compressor Step Height 5.5" (14 cm)
Compressor Step Width 21.0" (53 cm)
Compressor Step Depth 5.5" (14 cm)
Temperature Range 34º to 43ºF

AVAILABLE UPGRADES

Lock
L-Installed Lock
Add a single key lock to the door with the L option
Exterior
SSK
Stainless steel kickplate factory installed
DT - Digital thermostat
Install a digital thermostat with external readout for precise temperature management
LHD - Left hand door swing
Door reversal to left hand swing
Due to our commitment to continuous product improvement, all specifications are subject to change without notice
California residents:
Warning WARNING: This product can expose you to chemicals including nickel (metallic), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Note: Nickel is a component of stainless steel.

WHERE TO BUY

Invalid Format

DESCRIPTION

Summit Commercial brings unique appliance choices to ADA compliant settings with a new line of commercial beer dispensers made in Europe.

Sized at 32 inches high, the SBC58BBINKIFADA is designed to fit under lower ADA compliant counters. The front-breathing design allows built-in installation, while the fully finished black cabinet also enables freestanding use. This unit features an integrated stainless steel door frame designed to accept overlay panels, allowing you to create a custom look that blends into your cabinetry. We include a guard rail (ships uninstalled) and removable two-piece stainless steel drip tray for cleaner service. The SBC58BBINKIFADA does not include any tapping equipment, allowing "do-it-yourselfers" to customize their draft system.

Inside, the SBC58BBINKIFADA is designed to hold two 1/6 (sixtel) kegs or one tall quarter keg (note: interior does not accommodate a standard half barrel). Automatic defrost ensures easy user maintenance, with a seamless interior for easier cleaning. The stainless steel floor offers added durability when loading kegs. This unit includes an interior light with an on/off rocker switch and a dial thermostat for easy and intuitive temperature management. A CO2 tank bracket is located inside, allowing you to keep the tank inside and save on exterior depth.

The SBC58BBINKIFADA is ETL-S listed to NSF-7 commercial standards. Additional ADA compliant kegerator choices are available with stainless steel or glass doors. Browse our complete line for more choices. 



FEATURES

ADA compliant height
Sized at 32 inches high (32.25 to hinge cap) for installation under lower ADA compliant counters
Commercially approved
ETL-S listed to NSF-7 commercial standards and meets UL-471 for use in foodservice settings
Built-in capable
Front-breathing design allows fully recessed installation under counters
Tap kit not included
Install your own tapping equipment to create a customized beer cooler
Designed for 1/6 kegs
Interior can store up to two sixtel kegs
Panel-ready door
Customize the front by mounting an overlay panel over the door; seamless look can blend into other cabinetry with no exposed frame. Handle not included (panel size: 23 5/16" W x 28 1/4" H and at least 3/4" thick; maximum weight: 10 lbs.)
Adjustable thermostat
Interior dial thermostat ensures easy temperature management
Automatic defrost
No-frost operation for minimum user maintenance
User-reversible door
Unit ships with a right hand door swing. For a left hand version, add option LHD upon order
Stainless steel drip tray
Removable two-piece drip tray included for added convenience
Stainless steel guard rail
Durable railing makes it easier to neaten service
Interior light
Turn the light on when you need it and off when you're done with a convenient rocker switch
Interior CO2 holder
Bracket is installed inside, allowing you to save on depth by keeping the tank behind your kegs
Stainless steel floor cover
Interior includes steel cover to protect the floor when loading kegs
One piece interior liner
Easy clean-up with a seamless liner that won't hold a mess in hidden crevices
Hidden evaporator
Cold wall design with hidden evaporator and seamless interior
Fully finished cabinet
Allows the unit to be used freestanding
100% CFC free
Environmentally friendly design without ozone-damaging chemicals

SPECIFICATIONS

Overview
Height of Cabinet 32.0" (81 cm)
Height to Hinge Cap 32.25" (82 cm)
Width 23.63" (60 cm)
Depth 22.75" (58 cm)
Depth with door at 90° 45.0" (114 cm)
Capacity 5.5 cu.ft. (156 L)
Defrost Type Automatic
Door Panel-Ready
Cabinet Black
US Electrical Safety ETL
Canadian Electrical Safety ETL-C
Sanitation ETL-S
Amps 1.3
Voltage/Frequency 115 V AC/60 Hz
Weight 110.0 lbs. (50 kg)
Shipping Weight 120.0 lbs. (54 kg)
Parts & Labor Warranty 1 Year
Compressor Warranty 5 Years
Beer Dispenser
Door Swing RHD
Reversible Factory Reversible
Thermostat Type Dial
Interior Light Yes
Fan Type Exterior
Refrigerant R134a
Refrigerant Amount 1.8 oz.
High Side PSI 285.0
Low Side PSI 88.0
Inter Height 26.25" (67 cm)
Interior Width 21.0" (53 cm)
Interior Depth 17.75" (45 cm)
Compressor Step Height 5.5" (14 cm)
Compressor Step Width 21.0" (53 cm)
Compressor Step Depth 5.5" (14 cm)
Temperature Range 34º to 43ºF

AVAILABLE UPGRADES

Lock
L-Installed Lock
Add a single key lock to the door with the L option
Exterior
SSK
Stainless steel kickplate factory installed
DT - Digital thermostat
Install a digital thermostat with external readout for precise temperature management
LHD - Left hand door swing
Door reversal to left hand swing
Due to our commitment to continuous product improvement, all specifications are subject to change without notice
California residents:
Warning WARNING: This product can expose you to chemicals including nickel (metallic), which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Note: Nickel is a component of stainless steel.

YOU MIGHT NEED

KitCMTWIN
 
Quick View
FOR COMMERCIAL OR HOME USE

KitCMTWIN

12.0" H x 3.0" W x 3.0" D

Dual tap system with nitrogen tank to serve both nitro-infused coffee and flat iced coffee from most beer dispensers

KitNCF
 
Quick View
FOR COMMERCIAL OR HOME USE

KitNCF

12.0" H x 3.0" W x 3.0" D

Tapping equipment with nitrogen tank to serve nitro-infused coffee from most beer dispensers

KitNCFTWIN
 
Quick View
FOR COMMERCIAL OR HOME USE

KitNCFTWIN

12.0" H x 3.0" W x 3.0" D

Dual tap system with nitrogen tank to serve nitro-infused coffee from most beer dispensers

KitCF
 
Quick View
FOR COMMERCIAL OR HOME USE

KitCF

12.0" H x 3.0" W x 3.0" D

Tapping equipment with nitrogen tank to serve cold brew "flat" iced coffee from most beer dispensers

KitCFTWIN
 
Quick View
FOR COMMERCIAL OR HOME USE

KitCFTWIN

12.0" H x 3.0" W x 3.0" D

Dual tap system with nitrogen tank to serve cold brew "flat" iced coffee from most beer dispensers

SIMILAR PRODUCTS

SBC56GBINKADA
 
Quick View
MEETS NSF-7

SBC56GBINKADA

32.25" H x 23.38" W x 23.5" D

Built-in undercounter ADA height commercially listed beer dispenser with glass door, lock, and black cabinet; no tapp...

SBC58BBINKCSSADA
 
Quick View
MEETS NSF-7

SBC58BBINKCSSADA

32.25" H x 23.63" W x 22.75" D

Built-in undercounter ADA height commercially listed beer dispenser in stainless steel with; no tapping equipment inc...

SBC58BBIIFADA
 
Quick View
MEETS NSF-7

SBC58BBIIFADA

32.25" H x 23.63" W x 22.75" D

Built-in undercounter ADA height commercially listed dual tap beer dispenser with panel-ready door and black cabinet

BIM44GIFADA
 
Quick View
FOR COMMERCIAL OR HOME USE

BIM44GIFADA

32.38" H x 14.5" W x 23.5" D

ADA compliant built-in undercounter NSF-listed automatic defrost clear icemaker with integrated door frame to accept ...

SWC6GBLBIADA
 
Quick View
FOR COMMERCIAL OR HOME USE

SWC6GBLBIADA

32.38" H x 23.63" W x 23.5" D

ADA compliant, commercially approved wine cellar for built-in undercounter use, with glass door, black cabinet and lock

Back to top a7abe10fd88daf4fbca5d2d0b63793fd8db540d43a01e45fe71fb2e100f6a086
Your browser is out-of-date!

Update your browser to view this website correctly. Update my browser now

×